WOC Upgrade

Statement of Work Audiovisual System 1. Scope of Work US Navy Strategic Systems Programs (SSP) requires a new audio visual (AV) system for an operations center located at Strategic Weapons Facility Pacific (SWFPAC) in Bangor, WA. The proposed system shall be designed and installed to be efficient and flexible to allow for future upgrades, user friendliness and reliability. Upon completion of installation, configuration, programming and testing the Contractor shall deliver the source code for the AV system. 2. AV System, Design, Installation, Configuration, Test, and Training Contractor shall provide an AV system that meets the requirements and capabilities described below and as depicted in attachment 1, hereby incorporated into this statement of work (SOW) by reference. The Contractor will be responsible for procurement of all audio/video hardware, software, cabling and network topologies used to capture, process, distribute, and manage audiovisual signals, displays and any equipment required for a fully functional system as stated in the requirements, unless specifically annotated as government furnished/provided. Contractor shall provide:(1) the baseline build (without spares specified below) as detailed in attachment 1(2) "SVR_RM SPARE UNCLASS" AV System Source Input as detailed in attachment 1(3) "SVR_RM SPARE CLASS" AV System Source Input as detailed in attachment 1(4) "EWOC SPARE UNCLASS" AV System Source Input as detailed in attachment 1(5) "EWOC SPARE CLASS" AV System Source Input as detailed in attachment 1NOTE: No component in the AV system will have wireless and/or infrared capabilities. 2.1. AV Room Control System Contractor will custom design an intuitive and simple control system with the following characteristics: 2.1.1. AV room control system requires two (2) wired touch panels in designated areas as the primary room controllers for all system functions and associated devices in the room with the following minimum features: 2.1.1.1. The touch panel shall accurately reflect the status of the system(s) in use (room mode and classification status, microphone status, video call status, source and destination routing status) 2.1.1.2. Touch panels will also need to control the Unified Communication and Collaboration Systems (UCCS). The required features are as follows: 2.1.1.2.1. Dialing Buttons 2.1.1.2.2. camera pan/tilt/zoom 2.1.1.2.3. inputs to send to the UCCS for presentations, 2.1.1.2.4. self-view controls, 2.1.1.2.5. service buttons 2.1.1.3. Graphical User Interface (GUI): 2.1.2.3.1. Mode selection 2.1.2.3.2. Classification selection 2.1.2.3.3. Source selection 2.1.2.3.4. Individual source volume control and mute function 2.1.2.3.5. Display control 2.1.2.3.6. Microphone control and status 2.1.2.3.7. Video call control and status 2.1.2.3.8. Video caller volume control and mute function 2.1.2.3.9. Video recent calls list and redial (security classification dependent) 2.1.2.3.10. Video directory 2.1.2.3.11. Master mute and un-mute 2.1.2.3.12. Camera control including 6 user presets 2.1.2.3.13. Manual source to destination routing (any source to any display or speaker zone) 2.1.2.3.14. Favorites manager (save, name and recall favorite video/audio layouts) 2.1.2.3.15. LED classification signage control (custom messages) 2.1.2.3.16. Administrative access control 2.2. AV System Sources The AV system shall include hardware, software, cabling and network topologies used to capture, process, distribute, and manage audiovisual signals to support classified and unclassified video sources as depicted in attachment 1 and as written below: PELCO CLASS WOS WKS CLASSE WOC SENSEI-1 UNCLASS DPO WKS UNCLASSE WOC SENSE-2 UNCLASS DPO WKS CLASS CORIAN UNCLASS NET CDR WKS UNCLASS WOC-VTC CLASS NET CDR WKS CLASSE WOC SPARE CLASSS VR_RM SPARE UNCLASSE WOC SPARE UNCLASS SVR_RM SPARE CLASS WOS WKS UNCLASS Additionally, Contractor shall physically verify that the government existing cabling is sufficient and government provided equipment...