PROPULSION SHAFT SLEEVES

The United States Coast Guard Surface Forces Logistics Center has a requirement and requesting quotations for the following parts: Item 1) NSN: 2010-01-340-6083 SLEEVE, PROPULSION SHAFT ITEM NAME: SLEEVE, TAIL PROPULSION SHAFT CG DRWG NAME: SHAFT, PROTECTION SLEEVE IV FWD STERN TUBE SLEEVE PROPULSION SHAFT TAIL SLEEVE (FWD END STERN TUBE). P/N: 901-WMEC-243-004-PIECE 5. MATERIAL IAW ASTM-B-369 COPPER NICKEL ALLOY C96400 FINISH IAW SAE-J-448 REFERENCES: SEE SHAFT PROTECTION SLEEVE IV ON: CG DWG 901-WMEC-243-4, REV E, SHT 1, SHT 21, PIECE 5. CG DWG 905-WMEC-243-12, REV H, SHT1, SHT, 6, PIECE 5. APPROXIMATE SHIP WEIGHT: 506 LB/PC EACH ITEM MUST BE INDIVIDUALLY PACKAGED AND MARKED MFG: UNITED STATES COAST GUARD YARD PN: 901-WMEC-243-004-PIECE 5 QTY: 5 EA Item 2) NSN: 2010-01-345-2315 SLEEVE, PROPULSION SHAFT SHAFT PROTECTION SLEEVE III PROPULSION SHAFT TAIL SLEEVE (AFT END STERN TUBE) P/N: 901-WMEC-243-004-PIECE 4. MATERIAL: COPPER NICKEL ALLOY REFERENCES: WORK ITEM #1: 2010-01-345-2315, SLEEVE TAIL PROPULSION SHAFT, PURCHASE. PURCHASE SPECIFICATION FOR PROPULSION SHAFT SLEEVES, P-243-0085, REV K. SEE SHAFT PROTECTION SLEEVE III ON: CG DWG 901-WMEC-243-4, SHT 1, , SHT 20, PIECE 4. CG DWG 905-WMEC-243-12, SHT 1, SHT 6, PIECE 4. AFT STERN TUBE SLEEVE 12.250" OD X 10.560" ID X 63.750" LENGTH DRAWING NUMBER: 910 WMEC 243-004 REV E PART NUMBER: 901-WMEC-243-004-PIECE 4 APPROXIMATE SHIP WEIGHT: 638 LB/PC EACH PART MUST BE INDIVIDUALLY PACKAGED AND MARKED EACH ITEM MUST BE INDIVIDUALLY PACKAGED AND MARKED MFG: UNITED STATES COAST GUARD YARD PN: 901-WMEC-243-004-PIECE 4 QTY: 2 EA Item 3) NSN: 2010-01-340-5362 SLEEVE, PROPULSION SHAFT SHAFT PROTECTION SLEEVE I PROPULSION SHAFT TAIL SLEEVE (AFT END STRUT), P/N: 901-WMEC-243-004-PIECE 2. MATERIAL: COPPER NICKEL ALLOY REFERENCES: WORK ITEM #1: 2010-01-340-5362, SLEEVE TAIL PROPULSION SHAFT, PURCHASE. PURCHASE SPECIFICATION FOR PROPULSION SHAFT SLEEVES, P-243-0085, REV K. SEE SHAFT PROTECTION SLEEVE I ON DWGS: 901-WMEC 243-004, SHT 1, SHT 18, PIECE 2. 905-WMEC-243-12, SHT 1, SHT 6, PIECE 2. AFT STRUT TUBE SLEEVE 12.250" OD X 10.560" ID X 73.250" LENGTH DRAWING NUMBER: 910 WMEC 243-004 REV E PART NUMBER: 901-WMEC-243-004-PIECE 2 APPROXIMATE SHIP WEIGHT: 721 LB/PC 120845 EACH PART MUST BE INDIVIDUALLY PACKAGED AND MARKED MFG: UNITED STATES COAST GUARD YARD PN: 901-WMEC-243-004-PIECE 2 QTY: 2 EA Item 4) NSN: 2010-01-345-2314 SLEEVE, PROPULSION SHAFT SHAFT PROTECTION SLEEVE II PROPULSION SHAFT TAIL SLEEVE (FWD END STRUT), P/N: 901-WMEC-243-004-PIECE 3. MATERIAL: COPPER NICKEL ALLOY REFERENCES: WORK ITEM #1: 2010-01-345-2314 SLEEVE TAIL PROPULSION SHAFT, PURCHASE. PURCHASE SPECIFICATION FOR PROPULSION SHAFT SLEEVES, P-243-0085, REV K. SEE SHAFT PROTECTION SLEEVE II ON: CG DWG 901-WMEC-243-4, SHT 1, SHT 19, PIECE 3. CG DWG 905-WMEC-243-12, SHT 1, SHT 6, PIECE 3. EACH PART MUST BE INDIVIDUALLY PACKAGED AND MARKED MFG: UNITED STATES COAST GUARD YARD PN: 901-WMEC-243-004 PIECE 3 QTY: 2 EA In order to receive drawings you must be active in the Joint Certification Program (JCP) *****STANDARD COMMERCIAL PACKAGING IS UNACCEPTABLE, IF YOU CANNOT MEET THE COAST GUARDS PACKAGING REQUIREMENTS YOUR QUOTE WILL NOT BE ACCEPTED. ***** Delivery shall be F.O.B. Destination to USCG Surface Forces Logistics Center, 2401 Hawkins Point Road, Baltimore MD 21126, Mark for: Receiving Room Bldg. 88. This is a combined synopsis/solicitation for a commercial item prepared in accordance with the format outlined in FAR Subpart 12.6, FAC 2026-01 (Mar 13, 2026) and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation. Quotations are being requested, and a written solicitation will not be issued. The NAICS code for this solicitation is 331420 and the business size standard is 1050. The resultant purchase order will be awarded using simplified acquisition procedures in accordance with FAR 13.106. The U.S. Coast Guard intends to award on an all or none basis to a re...